Polarizing film press
- Model: XCP65-T6
- Use of equipment: The machine is used for laminating polarizer to various LCD and laminating process of other panel products (soft to hard).
Widely used in large-size LCD repairing and laminating process of various large-size glass. Polarizer feeding methods: coil or sheet material.
Sales Hotline：13410000400Send mail
◆Turn on the power. select “OK”, then click“auto”.
◆After aligning, place glass and polarizer on the laminating position of the machine.
◆Press the “vacuum” button, glass is tightly attached by vacuum.
◆Press the “start” button, move the roller to the laminating position.
◆Adjust the position of the left and right locating rings of the polarizer.
◆Clean the glass.
◆Tear the protecting films off from the polarizer and stickt to the roller.
◆Press the “start” button.
◆Finished laminating, press the “return of material” button, go back to the original position.
